This Kit Includes:
 
9 Replacement Peel & Stick Foam Pads. These will need to be attached to the plastic strip and the slit will need to be cut in the middle. See instructions below.
 
Gray or white upholstery grade foam, stock height of 5/16". Modeled after the originals.  Heat bonded, smooth static dissipating laminate on top.  These can be used as one piece pads in most carts.   However there are some in which you will need to cut a slit in the center.  A single edged razor scraper blade works well for this.  And an old intact pad with the slit works great as a pattern to help you get the cut fairly centered on the pad.  
 
1 Brown Smooth Glide felt strip, 6 inches long
You cut to length.  This way you don't end up with a bunch of pre-cut felt in sizes you don't need.  These are for the carts that used the felt pads attached to the copper spring.  Measurements for the 3 different sizes these carts used are included. 
 
15 Sensing Foil Tabs. These are the 7/32" wide type, which is a hair narrower than the full 1/4" wide ones, cut at a 60 degree angle. 4 Six inch long plastic strips to attach to the bottom of the pads and cut to length.  
 
5 Splicing Tape Tabs, also cut at a 60 degree angle.  Off white, 7/32" wide, New Old Stock Editmaster brand.  
 
6 Six inch long plastic strips to attach to the bottom of the pads and cut to length. 
 
Shipping Details:
 
USA Customers ONLY, Shipping is a flat fee of $5.00
Orders $40 and over get FREE shipping via USPS Ground Advantage.
 
Canadian Customers, Shipping is a flat rate of 12.99 for up to $100 worth of merchandise
 
International Customers
Shipping to most countries is $14.99 for the first $100 worth of merchandise. This is through Asendia. Unfortunately I no longer ship to Australia.
 
Depending on your country, you may be charged an excise tax, VAT, etc on your end. I do not collect any of these taxes or fees.